Go to The Printer Works Home Page
WX PARTS CATALOG
2000 Sheet Input Tray (Unit) Assembly (C3763A)
for LaserJet 5Si and 5Si Mopier series
See also C4781A 2000 Sheet Tray for LJ 8000/8100/8150 Series, Mopier 240, 320

Back 1 WX-Contents[Search for Printers & Parts] Previous AccessoryNext Accessory

Return to: WX Supplies & Accessories, WX Table of Contents, Go to: 5Si Data Sheet , 5Si Mopier Data Sheet


C3763A:
This is a complete kit for adding a 2000 sheet feeder to a 5Si series printer or Mopier that never had one installed before. It contains the feeder itselt, plus the necessary Paper Control PCBA (p/n C3768A) that mounts to the 5Si formatter using a ribbon cable that comes with it. A round cable (either p/n C3763-70000 or C4781-60504) that is also included with this item connects the board to the feeder.

C3763-60501:
This is the 2000 sheet feeder alone, for 5Si printers that already have the required paper control PCBA and cables included in the above C3763A package.

2000 Sheet Input Tray (Unit) Assembly
for 24 ppm printers as listed above
C3763A (with PCBA & cable), or
C3763-60501 (without PCBA &cable)

The 2000 Sheet Input Feeder is an essential addition to your high-speed HP LaserJet printer. It will optimize performance and overall efficiency, ideal for users who print large volumes and for those who need an additional input source or require high-volume unattended overnight printing. The additional capacity minimizes printer interaction. This version is compatible with the 5Si and 5Si Mopier series of printers.*

The feeder also adds the convenience of a printer stand, with wheels for mobility and threaded leveling feet for added stability.

The 2000-sheet tray is fully adjustable for all commonly used Domestic and International paper sizes: LETTER, LEGAL, A4, B4, 11x17, and A3.

 

*Note: You can also get a 2000 sheet feeder that is made for the 32 ppm LJ 8000/8100/8150 series and Mopiers 240 and 320 — p/n C4781A. Read more about it here. The C4781A can be used with the 5Si family of printers too, if you install the paper handling control PCBA described under C3763A in the notes under the photo to the left (p/n C3768A). A connector cable (p/n C4781-60504 or C3763-70000) would also be needed. The later printer models mentioned above (LJ 8000/8100/8150 series and Mopiers 240 and 320) have the paper control circuitry already built into the standard formatter boards so this extra PC board is not needed.

 

Back 1 WX-Contents[Search for Printers & Parts] Previous AccessoryNext Accessory

The Printer Works
Quality Printers, Parts, and Service since 1982
Telephone: 510 670-2700; or toll free (within USA): 800 225-6116
Catalog Selection Home Page Log In Contact Us Site Map Search Database Printers Current Specials

Image use tracked by Digimarc Corporation
© 2001 The Printer Works, Inc.