|Part Number||Description||Printer Compatibility Notes|
|111-1||RA1-4081-030||Filter, Ozone (100/115V)|| SX, TX, 8II, HP II |
|111-2||RA1-4082-000||Case, Filter|| SX, TX, 8II, HP II|
|111-3||RA1-4083-000||Duct|| SX, TX, 8II, HP II|
|111-4||RA1-5402-000||Hood|| SX, TX, 8II, HPII|
|111-5||RA1-5424-000||Clip, Hood|| SX, TX, 8II, HP II|
|111-6||XB1-2300-609||Screw, Binding, M3X6 (E21)|| SX, TX, 8II, HP II|
|111-7||XB4-7300-809||Screw, Pan Head, Self Tapping (G17)|| SX, TX, 8II, HP II|
The Ozone Filter Case Assembly shown here does not have a door. This is the original version. In order to change the filter, the user must remove two screws and lift the entire assembly out of the printer to slide the filter out from the bottom of the case.
Parts of this assembly are no longer manufactured or sold by Canon, and none of the parts from the new version can be substituted into the old version. However, The Printer Works has found a supplier that makes replacements and we can supply them, so part numbers for the original version are listed.
To change the ozone filter from an old version to a new version, the case assembly and filter of the new version must be ordered as a kit (Part No. RG-1753-020, Assembly Diagram 112).
|The Printer Works
Quality Printers, Parts, and Service since 1982
Telephone: 510 670-2700; or toll free (within USA): 800 225-6116
|Catalog Selection Home Page Log In Contact Us Site Map Search Database Printers Current Specials|
Image use tracked by Digimarc Corporation
© 1996 The Printer Works, Inc.