our Roller Kit for HP LaserJet 5P, too
ONLY NEED A FUSER ?
Maintenance Kit Contents:
Our kits contain GENUINE HP parts.
TPW Maintenance Kit for HP LaserJet 5P
and 5P-FS series, and other VX printers p/n's:
to check price or order 110V Kit)
to check price or order 220V Kit)
Only want a specific part and already know
how to install it? We offer all our Maintenance Kit contents
separately at competitive prices. Find individual parts by doing
a top-down search
(by printer model), or by browsing our catalogs.
Our parts are all factory fresh recent production
and are sealed in their original individual packages. Avoid the expense
and frustration of frequent repairs by using only Genuine HP OEM Parts!
no! My printer stopped working! If
the cause is fuser failure, you've come to the right place.
Fusers, like lightbulbs,
fail suddenly. If yours has gone out, this kit will fix the problem
Check your printer's
front panel error code message and status lights to confirm fuser
It contains fuser,
rollers, and complete instructions
we send you everything to get your printer running and restore print
quality, in one convenient, competitively priced kit, with our 6-month
warranty. Install a kit at intervals, too, to prevent sudden failure.
(see other indications
The printer doesn't
complete start-up sequence and the light pattern to the left
appears, [top to bottom: Error (back), Data, Ready, and Tray
1 lights, all come on solid]. The printer has experienced
a critical error.
Now press and hold down
the two buttons on the top of the printer to display the secondary
error light pattern.
The secondary light
pattern to the left indicates a fuser error [Error (back)
light steadily on]: Error Code 50, fuser malfunction.
To double check this
error, turn the printer off, wait 10 minutes and turn it on
again. If the error persists, the
most common cause is fuser failure, and in most cases fuser
replacement is indicated.
Please note: other items
within the printer can sometimes cause this error, e.g., the
DC Controller / Engine Controller Board.
indications a Maintenance Kit may be needed:
Poor print quality can indicate a dirty
fuser assembly and worn, dirty rollers. A dirty fuser is likely
- Blobs of toner may appear on the
paper from time to time.
- If a rough spot develops, a groove can
wear into the surface of the fusing roller, causing a vertical
strip of partially fused toner down the paper that can flake off
or become a sticky "glue" that attracts more dust and
dirt into the assembly.
- Dirt and friction are
enemies that cause wear, including premature fuser failure.
Note: A maintenance kit
cannot solve every printing problem. Other parts and assemblies
may sometimes be required to correct less-common faults.
your fuser is still good, but you are experiencing paper path problems,
our Roller Kits can provide a cost effective alternative to a full
See Roller Kit for
HP LaserJet 5P
Check Price & Availability
or Order HP LaserJet
5P Maintenance Kit: