our Roller Kit for HP LaserJet 2100, too
ONLY NEED A FUSER ?
Maintenance Kit Contents:
Our kits contain GENUINE HP parts.
TPW Maintenance Kit for HP LaserJet 2100
and 2100-FS series, and other 2100 printers p/n's:
to check price or order 110V Kit)
to check price or order 220V Kit)
these kits in both new and exchange versions wherever possible, and we also offer our own A-Grade Advance Exchange version, the 2100MKA-AEX. Our carefully selected A-grade parts are are the same quality as OEM, but cost you less.
Only want a specific part and already know
how to install it? We offer all our Maintenance Kit contents
separately at competitive prices. Find individual parts by doing
a top-down search
(by printer model), or by browsing our catalogs.
no! My printer stopped working! If
the cause is fuser failure, you've come to the right place.
Fusers, like lightbulbs,
fail suddenly. If yours has gone out, this kit will fix the problem
It contains fuser,
rollers, and complete instructions
we send you everything to get your printer running and restore print
quality, in one convenient, competitively priced kit, with our 6-month
warranty. Install a kit at intervals, too, to prevent sudden failure.
(see other indications
Check your printer's
front panel lights to confirm fuser failure
printer doesn't complete start-up sequence and all three indicator
lights come on solid. [bottom up: Go light, Ready light, Attention
light], indicating an error from which it cannot recover.
Press and HOLD the Go
button and the "Job Cancel" button simultaneously
to view the secondary LED error code pattern.
The secondary light
pattern to the left [Go and Ready lights steadily on] indicates
a fuser error bad fuser ("50 Service")
To double check, turn
the printer off. Wait 15 minutes, check the cables, and turn
it on again. If the error persists, the
most common cause is fuser failure, and in most cases fuser
replacement is indicated.
Please note: other items
within the printer can sometimes cause this error, e.g., the
DC Controller / Engine Controller Board.
indications a Maintenance Kit may be needed:
Poor print quality can indicate a dirty
fuser assembly and worn, dirty rollers. A dirty fuser is likely
- Blobs of toner may appear on the
paper from time to time.
- If a rough spot develops, a groove can
wear into the surface of the fusing roller, causing a vertical
strip of partially fused toner down the paper that can flake off
or become a sticky "glue" that attracts more dust and
dirt into the assembly.
- Dirt and friction are
enemies that cause wear, including premature fuser failure.
Note: A maintenance kit
cannot solve every printing problem. Other parts and assemblies
may sometimes be required to correct less-common faults.
your fuser is still good, but you are experiencing paper path problems,
our Roller Kits can provide a cost effective alternative to a full
See Roller Kit for
HP LaserJet 2100
Check Price & Availability
or Order HP LaserJet
2100 Maintenance Kit: